How to Fix Mosquito Net in Aluminium Window: A Guide to Protect Yourself
Do uninvited mosquitos surprise you every evening? Then, it’s time to implement effective measures to control mosquito infiltration into your house. Although many mosquito repellents are available on the market, installing the mosquito net in the aluminum window is the cream of the crop.
However, the problem is that the mosquito net breaks down after some time due to external or internal reasons. It is a serious issue that needs to be addressed as soon as possible because these small or large holes in the mesh nullify the effectiveness of the aluminum frame.
But don’t worry, you can quickly fix it. This article will guide you on fixing mosquito nets in aluminum frames without breaking the bank. So keep reading with us!
How to Fix Mosquito Net in Aluminium Window
Mosquito nets are very fragile and quickly get damaged after a while. Therefore, it becomes necessary to fix it at times, but before that, you must know the extent of the damage. There are many mosquito net problems, which we discuss and explain individually.
These problems include:
- Small holes
- Large holes
- Torn net
- Broken roller
- Broken aluminium edges
Want to know more about how to fix each mosquito net problem in an aluminum window? Stay with us!
Mosquito Net with Small Holes
Fixing the small holes is necessary, leading to permanent damage or torm net.
Requirements:
- Glue
- Brush
How to Fix it:
First, clean the damaged area and straighten the broken threads of the mesh at the edges. Apply the glue between the two edges and dry it for 5-6 hours. You can also use any sticky substance for more support.
Mosquito Net with Irregular Small Holes
Once you ignore small holes, it causes more damage with irregular edges.
Requirements:
- Adhesive tape
- Measuring tape
- Scissor
How to Fix it:
Clean the damaged area first and measure the damaged part with the help of measuring tape. After taking measurements, cut the rectangular adhesive tape 2-3 cm greater than the actual damage and place it on the affected part.
Note: The adhesive tape used for mosquito nets is a type of scotch tape showing a perforated net pattern.
Torn Mosquito Net
In the case of medium to large holes, it is necessary to repair the net immediately.
Requirements:
- Needle/Tweezer
- Wire
- An extra piece of net
- Measuring tape
- Masking tape
- Scissor
How to Fix it:
The first step is to find the exact measurement of the torn area. Once done, check for the extra piece of mosquito mesh made of the same material as the damaged one. Then, with the help of a needle or tweezer, pull the outer threads around the edge, create a 1-2 cm fiber fringe on each side, and make a sharp right angle by folding the tapered threads on four sides.
Now, place the extra patch on the torn area and start sewing. Following a zigzag pattern is essential as this helps keep the patch in place and prevent further damage. At the end, secure the patch on the other side by folding the fringes with the help of tweezers.
Note: For extra protection, apply a light layer of glue.
Mosquito Net with Broken Roller
Sometimes, the problem comes from a net structure, such as breakage or malfunction of the roller insect screen.
Requirements:
- Screwdriver
- Pliers
- Hooks or other replacement parts
How to Fix it:
Remove the side rails with the help of a screwdriver and disassemble them. After it uses tight pliers, pull the side guides and pry downward. This detached the roller from the wall, and you can quickly fix the mosquito net in an aluminum frame. But if the problem lies in the internal spring, remove the clips that block the mosquito net and fix the problem.
Note: Every mosquito net in the aluminum frame has different parts from others, so always check for the type of damaged part before purchase.
Mosquito Net with Broken Aluminium edges
Instead of a mosquito net, sometimes the problem lies in the aluminum frame itself. So, removing the fixtures and fixing them accordingly is very important.
Mosquito Net in Aluminium Window in Karachi
Mosquito nets are fragile, and taking care of them is crucial. Using proper technique, these nets are easily welded, so you don’t need to buy a new one. Regarding Mosquito nets in aluminum windows in Karachi, our team, “Metal and Aluminium,” is the jack of all trades. We have mosquito nets of extraordinary artistry. The aluminum frames are highly resistant and have minimum risk of damage.
Our services include: pre-order survey sales, installation and repair. We also provide 24/7 aftercare; disassemble your net and send it to us. It’s our duty to repair your net from our manufacturer without any hidden charges. You only have to pay for the repair. At Aluminium and Metals you can purchase high-quality mosquito nets for aluminum windows, doors, glasses, and many other products in the comfort of your home. So what are you waiting for? Aluminium and Metals are here to help you.
